Overview
Fifteen inches of convex glass does what a stock setup on most side by sides never does. One glance and you have the whole trail behind you, including the machine that has been eating your dust for the last mile.
The mirror hangs off electroplated aluminum brackets. Black anti-slip pads back the 2 inch clamp, and a strip of red double-sided tape holds the gasket in place while you work so nothing slides around on you. The 3/4 clamps use a toothed gasket that bites a 1.75 inch bar hard, which keeps the mirror from wandering once the whoops start. A butterfly clasp lets you pull the whole thing off in seconds when you trailer up.
Extra stress points on the back of the housing keep the wide glass from flexing, and the brackets give you three ways to set the angle, so this utv center rear view mirror lines up with wherever you actually sit. Hardware for both 1.75 inch and 2 inch round tubing comes in the box, which covers a Ranger, a RZR, a Mule and most other round cage bars.
- 15 inch convex glass for a wide rear view
- Electroplated aluminum brackets with anti-slip pads
- Toothed gasket grips 1.75 inch bars
- Butterfly clasp for quick removal
- Hardware for 1.75 and 2 inch round tubing
Bolt it up and stop guessing about what is behind you.
