UTV accessories are the parts that make the machine easier to live with: full covers for storage and trailering, seat covers cut to a specific model, and universal cage-mounted add-ons like grab handles, tool clamps, and a switch panel. This parent category has 42 options across three groups, and it spans the Polaris Ranger, RZR, and General, the Can-Am Defender, Maverick, and Commander, the Kawasaki Mule, the Honda Pioneer and Talon, and the CFMoto UForce. Start with the child category that matches the job, then narrow by machine. Covers and seat covers are cut for particular models and seat counts, so the machine matters there. The universal parts fit by roll bar diameter and go on almost anything.
Accessories
Fitment checked on every listing
Free shipping over $75 (lower 48)
Showing 1–24 of 42 results
How to choose UTV accessories
Three groups, three different questions.
Full covers: storage or trailering. The UTV covers split into two jobs. Storage covers are 210D or 420D oxford with an elastic hem, and several have sealed seams rated to 2400 Pa. The All-Weather UTV Storage Cover for Polaris Ranger & More says it plainly: storage use only, not for trailering. Trailerable covers step up to 600D oxford with a 3000 mm PU coating, heat-sealed seams, and a triple-point anchor system built to stay tight at highway speed. Measure the machine: two-seat covers here run 118 to 140 inches long, four-seat covers 148 to 177.
Seat covers: cut for the seat, not the brand. The UTV seat covers are model-specific. A Ranger XP 1000 wing-back bolstered seat, a Ranger split bench, a Defender eight-piece bench with center seat and headrests, and a RZR two-seat cockpit all take different cuts. Materials are mostly 1680D oxford, some neoprene-backed, some with a PVC waterproof layer, plus faux-leather and 900D camo options. Look for the exact model and generation in the title.
Universal parts: fit by bar. The universal accessories strap or clamp onto a round roll bar, and each listing gives a tube range. Measure the cage and match the number.
By machine
- Polaris Ranger. The Wingback Seat Cover Set for Polaris Ranger XP 1000 is cut for the bolstered wing-back seats so it does not sag or creep, and the Crew version covers all six seats in one set. The Leather Seat Covers with Pockets for Polaris Ranger XP 1000 add a thick cushion layer, and there are camo and six-piece split bench sets as well. For covers, the 2-3 Seater UTV Cover for Polaris Ranger XP 1000 & More is cut at 140 by 58 by 75 inches for full cab machines, and the Trailerable 4-Seater UTV Cover for Polaris Ranger Crew & More is the extra large 148 by 69 by 71 inch trailering cover. More in the Polaris Ranger hub and the Ranger accessories guide.
- Polaris RZR. Two seat cover options for the XP 1000 and Turbo: the Seat Covers with Pocket for Polaris RZR XP 1000, Turbo & RS1 in 1680D over neoprene with a zippered side pocket on each cushion, and the 1680D Water-Resistant Seat Covers for Polaris RZR XP 1000 & Turbo at about $76. The Trailerable 2-Seater UTV Cover for Polaris RZR Pro & More fits 2-seat RZR Pro, Defender XT, Maverick X3, and Talon, and the Small 4-Seater UTV Cover for Polaris RZR 4 & More is cut at 148 by 71 by 69 inches. See the Polaris RZR hub.
- Polaris General. The 1680D Seat Covers for Polaris General 1000 & XP 1000 are neoprene backed, water resistant, and UV proof, about $100. Browse the Polaris General hub.
- Can-Am Defender. The Seat Cover Set for Can-Am Defender HD5, HD7, HD8, HD9 & HD10 is an eight-piece 1680D set with headrests and center seat included, about $80, with a camo version alongside it. The Leather Split Bench Seat Covers for Can-Am Defender are an eight-piece leather-face set, and the Defender MAX gets both a water-repellent set and a camo set that cover both rows. The 2-Seat UTV Cover for Can-Am Defender HD & More is sized 126 by 70 by 75 inches for 2 seat Defender, Commander, and Ranger machines. More in the Can-Am Defender hub and the Defender accessories guide.
- Can-Am Maverick and Commander. The 2-Seater UTV Cover for Can-Am Maverick X3 & More is cut at 134 by 73 by 60 inches for 2 seat X3 models from 2017 to 2024, and the 4-Seater UTV Cover for Can-Am Maverick X3 MAX & More is cut at 177 by 73 by 63 inches for 64 inch X3 MAX models. The Lighted License Plate Holder for Can-Am Maverick X3 & More takes a standard car plate. The 2-Seat UTV Cover with Side Zipper for Can-Am Commander & More lets you reach into the cab without pulling the whole cover. Hubs: Can-Am Maverick and Can-Am Commander.
- Kawasaki Mule, Honda, CFMoto. The Camo Bench Seat Cover for Kawasaki Mule 610 & 600 and the Bench Seat Cover for Kawasaki Mule PRO-FXT, DXT, FX & DX cover one bench each in 900D water-resistant oxford. The 2-Seater Trailering UTV Cover for Polaris Ranger & More lists Mule, Pioneer, and UForce in its fit. See the Kawasaki Mule hub.
Storage cover or trailerable cover
| Storage cover | Trailerable cover | |
|---|---|---|
| Fabric | 210D or 420D oxford | 600D oxford, UV50+ |
| Waterproofing | PU coating, some seams rated to 2400 Pa | 3000 mm PU coating, heat-sealed seams |
| Hold-down | Elastic hem, straps or corner ring holes | Triple-point anchor system |
| Behind a truck | No, storage use only | Yes, built for highway speed |
| Price | About $50 to $100 | About $140 to $160 |
Trailer with the cover on, buy trailerable. Parked in the yard between rides, the storage cover is the right buy. For the broader question of what to add first, the UTV accessories guide and the side by side accessories guide cover it.
From MaxtOffroad
The accessory that gets replaced most often is the one that was cut generic. That is why our pick on this page is the Wingback Seat Cover Set for Polaris Ranger XP 1000. What sold us is the cut: it is shaped for the wing-back bolstered seat specifically, and the listing calls out that it does not sag or creep on rough trail. Neoprene and 1680D oxford with a PVC coating, hook-and-loop fasteners, and zip pockets on both bottom covers.
Frequently asked questions
What counts as UTV accessories on this page?
Three child categories: full UTV covers, UTV seat covers, and universal cage-mounted parts like grab handles, tool clamps, plate lights, and a switch panel.
Are side by side accessories the same as UTV accessories?
Yes. Side by side and UTV are two names for the same machine, so everything in this category applies. The product titles use UTV, and the fit is stated by model, seat count, or roll bar diameter.
Can I leave a storage cover on while trailering?
No. The storage covers are listed for parked use, and the 4-Seater UTV Cover for Can-Am Maverick X3 MAX & More says to pull it before you trailer. The trailerable covers are the ones with 600D fabric and a triple-point anchor system built for highway speed.
Do the seat covers fit my exact model?
Each seat cover is cut for the model and seat style in its title, such as the Ranger XP 1000 wing-back seat, the Ranger XP 1000 split bench, the Defender HD5 to HD10 bench, or the RZR XP 1000 and Turbo seats. Match the title to your machine and trim before you order.
Do the universal accessories fit every cage?
They fit by roll bar diameter, and each listing gives its range, from 0.75 inches on the tool clamps to 2.25 inches. A few are round bar only, and the spare belt mount is not for Pro-Fit cages.