Overview
Every accessory you add brings its own switch, its own inline fuse, and its own run of wire tucked somewhere behind the dash. Three builds later you have a rat’s nest. This Kemimoto 8 gang switch panel replaces all of that with one screen and one control box.
Each circuit needs only power and ground from the device. No extra fuses, no separate relays, no toggle hunting under the seat. The panel runs DC 12 to 24V with a 60A max current, rated at 12V 20A or 24V 10A per the spec sheet, which works out to 600W at 12 volts and 1200W at 24. Operating range is -40F to +221F, so cold mornings are not a factor.
Protection built in
Three layers cover the electrical side: a 60 amp circuit breaker, blade fuses, and high-power solid-state relays. Together they handle thermal, overload, over-voltage, and over-current protection. The backlight dims automatically with ambient light, so it is readable at noon and not blinding at midnight.
- DC 12-24V, 60A max current
- 600W at 12V, 1200W at 24V
- 60A circuit breaker, blade fuses, solid-state relays
- Auto-dimming backlight
- -40F to +221F operating range
The box ships with the panel screen, circuit control box, mounting brackets for both, pin cable, wiring harness, red and white cable, a cable with circuit breaker, zip ties, labels, and screws. The compact footprint is the point on a UTV dash where panel real estate is short. Fits RZR, Maverick X3 and X3 MAX, Defender, UFORCE and ZFORCE, plus trucks, Jeeps, and boats.
