Overview
This is the front end upgrade that does three jobs at once on a Pioneer 1000-6: it guards the nose, it adds light, and it gives your winch a proper home.
The bumper is built from heavy duty metal with real impact resistance, covering the headlights and the engine hood. The wings carry built in lights running on 10 to 30V DC at 24W each, putting out 1680 lumens per side. The covers are PC material, so they take wear and impact rather than crazing the first time gravel finds them, and the lights are IP67 rated with a life past 30,000 hours. There is also an adjustable 8 mm oval hole in the upper center if you want to add another light later.
The middle of the bumper has a dedicated spot for a winch, plus a hook ring underneath so the winch hook has somewhere to sit. That last detail matters more than it sounds. It stops the hook rattling against the bumper every time you cross rough ground.
- Heavy duty metal construction
- Built in wing lights: 10-30V DC, 24W each, 1680 lumens each
- IP67 rated with a 30,000+ hour rated life and PC light covers
- Winch mounting spot with a hook ring below
- Adjustable 8 mm oval hole for adding another light
- Wiring harness and switch included
The harness and switch come in the box, so you can put the switch on the control panel and run the lights without hunting for wiring parts. Fits the Pioneer 1000-6 for 2023 and 2024.
