Overview
This is SuperATV’s 6 inch LED light bar, a combination spot and flood light small enough to go on almost any bumper. It is the bar to pick when you want extra light in one place and do not have room for a long bar.
What it fits
The bar is universal. With the included brackets it bolts to a flat spot such as a bumper. If you want it on the cage, SuperATV offers cage mounts for 1.5 inch, 1.75 inch, 1.875 inch and 2 inch tube. Those options are marked See Fitment, so measure your cage tube before you choose one.
Which brackets to pick
The options are Included brackets (Universal), Low Profile Bracket Kit (Universal), and a 1.5 inch, 1.75 inch, 1.875 inch or 2 inch Cage Mount. SuperATV describes the cage mounts as billet aluminum with a rubber seal so they do not slide on the tube, and the low profile brackets as the choice for a snug hood or roof mount. If you are bolting to a bumper, the included brackets are all you need.
All of our bars and mounts are in UTV light bars, and the rest is in UTV lighting.
Features
- Housing and lens: die-cast aluminum housing with a polycarbonate lens
Tech Specs
| Beam | Combination spot and flood |
|---|---|
| Power | 36 W |
| Output | 5,760 raw lumens |
| Leds | 12 OSRAM 3 W LEDs |
| Water Rating | IP67, which the maker spells out as immersion up to 1 m for up to 30 minutes |
| Working Temperature | Minus 40°F to 140°F |
Installation
Mount the bar, run the harness to the battery and put the rocker switch where you can reach it. The harness and switch come with the bar. Aim it after dark on level ground, then tighten the brackets.
FAQs
Is one 6 inch bar enough?
It adds light where you point it. It will not light a whole trail the way a long bar does. Many owners use a short bar low on the bumper or as a reverse or work light. If you want more, look at the twelve inch version.
Do I need to buy a harness?
No. SuperATV lists a wiring harness and rocker switch as included.
Can it get wet?
It carries an IP67 rating, stated by the maker as immersion up to 1 m for up to 30 minutes.
Which cage mount fits my machine?
The cage mounts go by tube diameter. Measure the tube where the light will sit and pick the matching size.
