Overview
This is SuperATV’s 40 inch straight double-row LED light bar. It is a roof or cage width bar for a full size machine, built around 80 CREE LEDs.
What it fits
The bar is universal with the included brackets. Measure the spot first, since the bar is 43-1/2 inches wide with its brackets on. The other options are a Low Profile Bracket Kit (Universal) and a Maverick X3 Mounting Bracket.
Included brackets or low profile
The included brackets stand the bar up to 4-1/2 inches tall. SuperATV’s low profile brackets are the choice if you want the bar snug against the roof, to keep the overall height down. They are steel with a UV-resistant black powder coat and come with their own hardware. Low matters if you trailer in an enclosed trailer or ride under branches.
All of our bars and mounts are in UTV light bars, and the rest is in UTV lighting.
Features
- Width: 42-1/4 inches without mounting brackets, 43-1/2 inches with brackets
Tech Specs
| Power | 240 W at 12 V |
|---|---|
| Output | 38,400 raw lumens |
| Leds | 80 CREE LEDs in two rows |
| Height | 3 inches without mounting brackets, 4-1/2 inches with brackets |
| Water Rating | IP67, stated as immersion up to 1m for up to 30 minutes |
| Working Temperature | Minus 40°F to 140°F |
Installation
Bolt the brackets on loosely, set the bar with a second person, then run the supplied harness to the battery. Aim it at night on level ground and tighten everything last.
FAQs
Is a switch included?
SuperATV lists a wiring harness as included. The maker's information for this bar does not mention a switch, so ask us before you order if that matters.
Is it a spot or a flood beam?
The maker's information for this bar does not state a beam pattern.
How much does it draw?
SuperATV lists the power consumption as 240 W at 12 V and does not publish an amp figure for this bar.
Is there a longer or shorter bar?
Yes. See the fifty inch double-row bar and the thirty inch combination bar.
