Overview
This is SuperATV’s RGB rock light kit. The lights go under the machine or on the cage, throw a wide flood of light at the ground around the wheels, and change color and brightness from your phone.
What it fits
The kit is universal. Each light comes with two mounts. SuperATV says the flat mounts suit wheel wells and other level surfaces, and the curved mounts are for the cage. The maker does not give a tube size for the curved mounts.
4 Lights or 8 Lights
Four lights is one per wheel well, which covers the ground at each corner. Eight lets you add lights along the frame or on the cage as well, for a more even glow and fewer dark patches. If the main reason is seeing your tire placement at night, four does it. If you also want the look, go eight.
More in UTV rock lights and UTV lighting.
Features
- Lights: 4 Lights or 8 Lights, with 6 LEDs in each
- Housing: aluminum die-cast, for heat dissipation, and impact-tested
- Operating voltage: 10-30 V
- Operating temperature: minus 20°C to 50°C
- Control: brightness and color through the LED LAMP app over Bluetooth
Tech Specs
| Beam | Wide 90-degree flood pattern |
|---|---|
| Output | Effective power 2W and effective lumen 61.86 lm, as SuperATV lists them |
| Water Rating | IP68 waterproof |
Installation
Decide where each light goes, fix the flat or curved mount, then run the wires back to the controller. All the hardware is included. Keep the wiring out of the suspension travel and away from the exhaust, and tie it up so nothing hangs where a rock can grab it.
FAQs
Do they sync with SuperATV whip lights?
No. SuperATV's note says the kit does not sync with its fang and whip lights.
How do I control them?
From your phone, with the LED LAMP app over Bluetooth. You set brightness and color there.
Can they go underwater?
They carry an IP68 waterproof rating.
Are the mounts included?
Yes. Each light has a flat mount and a curved mount, with hardware.
